HOW TO UNFOLD:
1. POSITION THE BIKE UPRIGHT ON THE BIKE STAND.
2. IF THE MAGNETS ON THE FRONT AND REAR WHEEL ARE COUPLED, DISCONNECT THEM BY PULLING THE FRONT AND
REAR WHEELS AWAY FROM ONE ANOTHER.
3. HOLD THE REAR OF THE BIKE STEADY WHILE YOU PIVOT THE FRONT OF THE BIKE AROUND THE HINGE POINT TO PUT
THE FRAME IN A STRAIGHT LINE.
LOCKING
MAGNETS
BIKE STAND
FOLDING
HINGE POINT
To Next Page
Loading...
Need help?
General
