TROUBLESHOOTING: IF THE HANDLEBAR DOES NOT STAY SECURE WITH THE CLAMP CLOSED, YOU MAY NEED
TO TIGHTEN THE CLAMP.
TO TIGHTEN THE CLAMP:
1. PULL THE CLAMP LATCH OPEN.
2. FINGER TIGHTEN THE KNOB BY TURNING IT CLOCKWISE FOR A FEW ROTATIONS.
3. CLOSE CLAMP LATCH.
NOTE: IF YOU CANNOT CLOSE THE LATCH WITH EASE, THE KNOB MAY BE TOO TIGHT. LOOSEN THE KNOB SLIGHTLY
BY TURNING IT COUNTERCLOCKWISE FOR ½ ROTATION, AND THEN TRY CLOSING THE KNOB AGAIN.
IMPORTANT: NEVER RIDE WITH THE HANDLEBAR CLAMP UNLATCHED OR WITH THE CLAMP LOOSE AROUND THE HANDLEBAR.
LATCH
KNOB
(UNDERSIDE OF CLAMP)
To Next Page
Loading...
