Jetson Arro - Page 34

32
2. RAISE OR LOWER THE SEAT TO THE DESIRED POSITION, MAKING SURE NOT TO RAISE THE SEAT HIGH ENOUGH THAT THE
"MINIMUM INSERTION" MARK COMES INTO VIEW ABOVE THE CLAMP.
3. WHILE HOLDING THE SEAT IN PLACE, CLOSE THE CLAMP LATCH AND, IF NECESSARY, RETIGHTEN THE CLAMP KNOB BY
TURNING IT CLOCKWISE. SEE PAGE 30 OF THIS MANUAL FOR CLAMP INSTRUCTIONS AND TROUBLESHOOTING.
KNOB
SEAT CLAMP
LATCH