Jetson BREEZE JMY3000-BLK - Throttle Operation - Modes; Speed and Display Mode Settings

SPEED MODE
When power on
the default display is mode (appear at top right).
You may change it using the buttons.
Speed mode: this device is set with 3 speed modes,
for different skill modes and ages:
•Speed mode 3 - using full throttle will gain
maximum speed of the scooter, 18MPH at default.
•Speed mode 2 - using full throttle, the maximum speed is12MPH.
•Speed mode 1 - using full throttle, the maximum speed is 7MPH.
LCD BACKLIGHT (rst mode)
When power is on, you can turn on or off the LCD backlight by long press
There are 3 levels for different LCD brightness.
Press to change level from 1 to 3 (low/middle/high).
Long touch to save settings.
Short touch to enter second mode.
SPEED LIMIT MODE (second mode)
Default and highest speed 18MPH at full throttle.
You can dene other speed limits (from 7MPH to 18MPH).
Press or buttons to change speed limit number.
Long touch to save setting.
Short touch to enter third mode.
DISPLAY MODES
To enter the display modes settings :
Touch buttons for 2 seconds will enter in the rst mode.
Press to switch between modes
Long press will back to normal function menu.
SPEED
20
THROTTLE OPERATION