Jetson Joust - Adjusting the Handbrake Position (if Necessary)

19
YOU WILL NEED THE 5MM ALLEN KEY.
1. LOOSEN THE BOLT ON THE HANDBRAKE CLAMP BY TURNING IT COUNTERCLOCKWISE FOR 1 – 2 ROTATIONS WITH THE 5MM
ALLEN KEY.
2. ROTATE THE HANDBRAKE CLAMP AROUND THE HANDLEBAR UNTIL THE HANDBRAKE LEVER IN A POSITION AT WHICH CAN
EASILY BE REACHED BY THE RIDER WHEN HOLDING ONTO THE HANDLEBAR.
3. WHILE HOLDING THE HANDBRAKE IN THE DESIRED POSITION, TIGHTEN THE BOLT ON THE CLAMP BY TURNING IT CLOCKWISE
WITH THE ALLEN KEY.
1.4 Adjusting the Handbrake Position (if necessary)
5MM ALLEN KEY
HANDBRAKE CLAMP
HANDBRAKE