www.jetsonbike.com 11
Before you ride you must be certain that you and your mini bike are ready to ride.
Below is the pre-ride checklist. Be sure to review all the topics every time before
riding.
1. Check tire pressure with the tire gauge in your Jetson jr. tool kit.
Be sure they are at a minimum of 20psi and no more than 40psi.
2. Check rims to make sure they are not bent or damaged.
3. Check the level of charge on the batteries.
4. Check the drive chain to see if it needs to be lubed or tightened.
5. Check the brake to be sure it is working properly.
6. Look over the entire bike for loose nuts and bolts or body parts.
7. Check the throttle to be sure it rotates freely and returns to the low
position on its own when released.
8. Be sure that the handlebars turn freely.
Failure to properly maintain your mini bike can lead to a crash in which
you can be seriously injured or killed. Always perform a pre-ride inspection on your
mini bike and keep it in good condition to get the most out of your Jetson jr. electric
mini bike.
PRE-RIDE CHECKLIST
BEFORE YOU RIDE
To Next Page
Loading...
Need help?
General
