1.3 Attaching the Handlebar
1. SLIDE THE HANDLEBAR BASE INTO THE STEM SUCH THAT THE FOLLOWING CONDITIONS ARE MET:
· THE SIDE OF THE HANDLEBAR WITH THE LCD SCREEN IS POSITIONED ON THE SIDE OF THE SCOOTER ACCESSIBLE
BY THE RIGHT HAND OF THE RIDER.
· THE WIRES ARE CAREFULLY TUCKED INTO THE STEM TUBE AND NOT PINCHED BY THE HANDLEBAR WHILE IT IS
BEING INSERTED.
· THE 4 HOLES AT THE BASE OF THE HANDLEBAR ALIGN WITH THE 4 HOLES IN THE SIDES OF THE STEM AFTER THE
HANDLEBAR BASE IS INSERTED INTO THE STEM.
DEPENDING ON THE DATE OF PRODUCTION, THE WIRES ON YOUR SCOOTER WILL EITHER BE GROUPED INTO
1 SET VERSION OR 2 SETS VERSION .
A
B
To Next Page
Loading...
Need help?
General
