1.4 Charging the Rhythm
CHARGING PORT WITH COVER
1. CONNECT THE CHARGING CABLE WITH THE CHARGER.
2. PULL THE RUBBER COVER ON THE CHARGING PORT OPEN.
3. PLUG THE CHARGING CABLE INTO THE WALL OUTLET AND THEN PLUG THE CHARGER INTO THE CHARGING PORT
ON THE SCOOTER.
4. WHILE CHARGING, THE INDICATOR LIGHT ON THE CHARGER WILL ILLUMINATE IN RED; WHEN CHARGING IS
COMPLETE, THE ILLUMINATION WILL TURN GREEN.
5. WHEN THE BATTERY IS FULLY CHARGED, UNPLUG THE CHARGER FROM THE CHARGING PORT.
6. CLOSE THE CHARGING PORT COVER.
To Next Page
Loading...
Need help?
General
