7
Please be careful when removing the Slate from the box, making sure
to not scratch the frame. Please check the carton for loose parts before
discarding.
The Slate comes fully assembled, except for the Handlebars. Please look
at the inside of each Handlebar and see which is labeled R (right) and L
(left). To connect the Handlebars, place L into the Left side and R into the
Right side (left and right directions are as though you are standing on the
deck). Tighten by turning the Handlebars toward the Front Wheel.
UNFOLDING AND FOLDING THE SLATE
To unfold the Slate, rst make sure the Hook is not connected to the
Loop on the Rear Brake. Lift the Handlebar and Stem Up towards the
front tire and open the Folding Lever all the way down. Once the Stem
is fully up right, Push the Folding Lever up until you hear a clicking
sound to lock it.
Folding
Lever
Locked
UNBOXING
To Next Page
Loading...
Need help?
General
