JF Digital MX-Pro - Page 5

5
1 2
3
4
5
6
7
8 9 1011 12
S/P DIP
OUTPUT
MX-1A:
1. Power supply AC110 / 230V connector ;
2. Power on / off switch button;
3. WiFi2.4G / 5G, Bluetooth 4.1 antenna connector;
4 System button: short press: screen on / off, long press: soft shutdown / restart;
5. Ethernet interface: connect to Ethernet through the
network cable;
6. USB1 device connector: connects local devices, such as mobile hard disk, USB drives;
7. USB2 audio output connector: connect external decoder with the USB cable;
8. I2S output connector, (I2S interface definition map see Section 2.4);
9. S/PDIF (Coaxial) output connector;
10. TF Card connector;
11. USB audio input connector;
12. Analog audio output interface;
Note: USB audio input connector: After connecting USB2/Audio Output connector, the
music of this unit is decoded and played back through the Analog Audio Output Interface.
(Optional)
100Mbps /1Gbps 100Mbps /1Gbps
MX-2A Pro
1. Power supply AC110 / 230V connector;
2. Power on / off switch button;
3. WIFI2.4G / 5G, Bluetooth 4 antenna connector;
4 System button: short press: screen on / off, long press: soft shutdown / restart;
5. 100MBit / 1GBit Ethernet interface: connect to 100MBit / 1GBit Ethernet
through the network cable;
6. USB1 device connector: connects local devices, such as mobile hard disk,
USB drives;
1 2
3
4
5
6
7
8
9
10
11