Need help?Do you have a question about the JFY tech JSI-3000TL-S and is the answer not in the manual?
Describes the physical components and layout of the inverter.
Guides on checking the inverter package for damage and completeness.
Advises on choosing an optimal location for installing the inverter.
Details the procedure for mounting the inverter securely on a wall.
Explains the system diagram and identifies connection points.
Instructions for connecting the inverter to the AC power grid.
Details how to connect the solar panels to the inverter's DC input.
Explains how to use the function key for navigation and settings.
Details the various messages and information displayed on the LCD screen.
Explains how to interpret and troubleshoot error and warning messages.
Details how to set up data communication using the RS232 interface.
Explains RS485 setup, connectors, and daisy chain configuration.
Details the steps for initiating and processing a warranty claim.
General| Max. DC Voltage | 550 V |
|---|---|
| Start Voltage | 120 V |
| Rated AC Power | 3000 W |
| Rated AC Voltage | 230 V |
| AC Voltage Range | 180-280 V |
| Power Factor | >0.99 |
| THDI | <3% |
| Max. Efficiency | 97.5% |
| MPPT Efficiency | 99.5% |
| DC Connection | MC4 |
| Protection Degree | IP65 |
| Cooling | Natural convection |
| Frequency | 50/60 Hz |
| Efficiency | 97.5% |
| Number of MPPTs | 1 |
| Max. AC Power | 3300W |
| Operating Temperature Range | -25°C to +60°C |
| Humidity | 0-100% |
| AC Connection | Screw terminal |
To Next Page