Move to left-rear corner Move to right-rear corner Move to right-front corner Move to left-front corner
1. Move the nozzle to below 4 points to level the platform.
2. Start in one corner and put the A4 paper underneath the nozzle.
3. Manually adjust the bed by tightening up or slackening relevant spring bolts until there is
slight resistance on the paper from the nozzle.
4. Repeat this step in all the corners of your bed.
Operation
Bed Leveling
Note: You're highly recommended to watch video tutorials first or contact JGAURORA before leveling or if you have any problems in leveling.
15
To Next Page
Loading...
