Need help?Do you have a question about the JGaurora JGMAKER Magic and is the answer not in the manual?
General| Build Volume | 220 x 220 x 250 mm |
|---|---|
| Layer Resolution | 0.05 - 0.3 mm |
| Print Speed | 10 - 150 mm/s |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, SD Card |
| Supported Materials | PLA, ABS, PETG, TPU |
| Print Technology | FDM (Fused Deposition Modeling) |
| Heated Bed | Yes |
| Bed Temperature | up to 110°C |
| Nozzle Temperature | Up to 250°C |
| Display | LCD |
| Frame Material | Aluminum |
| Power Supply | 24V |
| Extruder Type | Single Extruder |
Lists essential safety precautions for operating the 3D printer.
Overview of the printer's main menu structure and control panel elements.
Guides on adjusting input voltage and initial printer leveling.
Step-by-step instructions for accurately leveling the print bed.
Detailed instructions on how to load filament into the printer correctly.
Steps for initiating prints and changing filament during operation.
Step-by-step guide for installing the JGcreat slicing software on your computer.
How to launch, select the printer, and navigate the JGcreat software interface.
Detailed steps for selecting the correct printer model within the software.
Explains model upload, print quality settings, and parameter configuration.
To Next Page
