JGaurora JGMAKER Magic - Attention and Safety Precautions; User Safety Issues

With User to Create Better Product
4
1, Attention
1.1 User Safety Issue
 Forbidden to somewhere near flammable gas, liquid and dusty area；
 Forbidden for children or untrained people to use the machine alone；
 When machine running,forbidden to touch model and nozzle, to avoid scald；
 When machine running,forbidden to hands inside machine to avoid pinch；
 If machine running over 96 hours, must stop for 1-3 hours；
 Make sure connect to ground, don’t modify the plugin, to avoid any damage, electric shock and fire
accidence；
 Please the cable we provided, can’t use unqualified power cable；
 Spare machine for a long time, please disconnect the cable；
 Please in ventilated dry area, to avoid humid and sun cause plastic aging；
 When remove support material, high recommend to wear goggle;
 Before turn on machine, make sure SD card is removed to avoid any malfunction.
 Avoid remove SD to frequently,before insert SD card，must cut off the power for 10 second，then turn on
machine and insert SD card.
 Please keep the package intact,for maintenance purpose.
1.2 Power Requirements
 power plugin should connect to ground.don’t modify the plugin, to avoid any damage, electric shock and fire
accidence.
 working voltage is AV 110~230V with 50HZ AC,；
Note：①before machine assembly,please check the machine power voltage is suitable for power supply voltage in
your area.（how to check：through observe hole at the bottom of base, can the voltage switch, if voltage is 220V, it
will show 230V, if it is 110V, it will show 115V. the operation detail is in 3.1 Input Power Adjustment; ②turn off
and on should have time interval over 5 second.
1.3 Printer Environmental Requirements
 temperature：5℃~40℃，humidity：20%~50%。
attend：under this range machine can work well；if over，might affect the printing result!
 If temperature is too low or high, can adjust the hot bed temperature, or slice temperature to reach good
printing result.