With User to Create Better Product
7.3. Maintenance of Moving Components
If you notice the printer has become noisy, or vibrates excessively, you may need to clean the rail rods
and add some lubricating oil to reduce friction.
To Clean and Lubricate: first, with a clean dust cloth, clean the grease or dust from the moving parts.Then
apply 3-5ml (about 5-8 drops) lubricating oil along the motion rails. Brush the oil along the respective
parts or rail axis, and move the moving parts along the rails back and forth, in order to distribute
oil within the bearings and to lubricate the entire length of the guide rails and polished rods.
To Next Page
Need help?
General
