ƽ
Re-start the machine, water-full indicator is off .
1 1
z W hen internal water-tank is full, water-draining motor works abnormally. 10 minutes later ,U nit=-off
automatically and water-full indicator turns on .
z After empty the water-tank, press P O W E R to re=-start the machine.
W ater-drainage as following :
z P ower-off the power-supply and pull-out power cord .
z P ut water-receiving tray underneath the water-drainage port, then pull-out the water-stopper.
z Do not move the machine when water-drainage, otherwise cause water- leakage to wet the floor or
carpet.
z After internal water-tank is empty, re-put the water-stopper into its position.
Unit Body and Accessories Water Drainage
To Next Page
Loading...
