5.2. Main functions
● Shutdown
The device shuts down automatically if the power source to it is disconnected.
● Sleep
The device will disable its recording, GNSS, and other functions if it detects that
the vehicle's ignition is turned to the OFF position. Then it will enter the sleep mode
to save power.
● Video recording
When the vehicle's ignition is turned to the ON position, the device will start
recording automatically. It will simultaneously record video, including audio,
captured by the connected camera(s). This function can make use of loop
recording to store video on the memory card, without human intervention.
● Tracking
When the vehicle's ignition is turned to the ON position, the device will
automatically activate its GNSS module to fix positions. This function enables
the device to track and acquire the geographic location of the vehicle, which
is uploaded to the cloud server.
● Event monitoring
When in operation, the device can monitor the vehicle speed, gravity acceleration,
driver and vehicle status, etc.; when an abnormal condition occurs, the device issues
an alert to remind the driver and uploads the event with geographic location and
image/video evidence to the platform.
05/Main Functions
5.1. Basic operation
● Startup
If the device's power cable is properly connected to the vehicle's power source,
the device will start automatically when the vehicle is started without human
intervention.
5.3. Remote Management
● Live video
Through the background service you can use the device's cellular capability to
transmit audio and video from the camera(s), so you can view the vehicle's status
live.
● History video
Through the background service you can use the device's cellular capability
to push the selected audio and video files as well as the history video files stored
in the memory card to the platform.
● Location query
You can check the live or history locations of the vehicle via the platform to
know its past trips.
8
To Next Page
Loading...
Need help?
General
