JJC JM-II Series - Product Features; JM Receiver Specifications; JM Transmitter Specifications

JJC JM-II Series Radio Frequency Wireless Shutter is designed for most DSLR and
SLR cameras that have a remote socket on the camera body. The system works at a
433MHZ frequency and has 16 available channels. What’s more, this wireless remote
system adopts a technology to allow the transmitter trigger the receiver without direct line
of sight up to 30 meters. The JM-II receiver simply attaches to a compatible camera's
accessory shoe, then just connect the supplied JJC receiver cable to the camera's remote
socket. The receiver is powered by one piece of CR-2 lithium battery while the transmitter
is powered by one piece of 23A battery. JM-II transmitter can trigger the camera shutter at
five modes: single shot, 5 seconds delay shot, 3 continuous shots, unlimited continuous
shots and bulb shot. The receiver has a 1/4"-20 tripod mount socket on the bottom, so you
can even mount the receiver onto a tripod. Most important, our JM-II transmitter is able to
fire multiple receivers at the same time. All these features make it good for eliminate
camera shake in long exposure photography.
Package Contains
 JM II transmitter x 1
 JM II receiver x 1
 CR-2 battery x 1
 23A battery x 1
 Connecting cord x 1
 This manual instruction x 1