JL Audio JX1000/1D - User Manual

To Next Page

Thank you for purchasing a JL Audio amplifier for

your automotive sound system.

Your amplifier has been designed and manufactured to exacting

standards in order to ensure years of musical enjoyment in your vehicle.

For maximum performance, we highly recommend that you have

your new amplifier installed by an authorized JL Audio dealer. Your

authorized dealer has the training, expertise and installation equipment

to ensure optimum performance from this product. Should you

decide to install the amplifier yourself, please take the time

to read this manual thoroughly so as to familiarize yourself

with its installation requirements and setup procedures.

If you have any questions regarding the instructions in this

manual or any aspect of your amplifier’s operation, please contact your

authorized JL Audio dealer for assistance. If you need further assistance,

please call our Technical Support Department

at (954) 443-1100 during business hours.

OWNER’S MANUAL

Class D Monoblock Subwoofer Amplifiers

Main Page

Need help?

Do you have a question about the JL Audio JX1000/1D and is the answer not in the manual?

Summary

Protect Your Hearing

Serial Number Recording

Installation Applications

Planning Your Installation

Cooling Efficiency Considerations

Ensuring the amplifier's outer shell is exposed to adequate air volume for optimal heat dissipation.

Safety Considerations

Installing the amplifier in a dry, ventilated environment, away from vehicle safety equipment.

Stupid Mistakes to Avoid

Critical warnings against improper drilling, wiring, and mounting to prevent damage or injury.

Product Description

Typical Installation Sequence

Power Connections

Fuse Requirements

Specifies the correct fuse type and rating for each amplifier model for vehicle safety.

Remote Turn-On

Amplifier Inputs

Low-Level Inputs

Standard RCA jacks for preamp level signal input, preferred connection method.

Input Sensitivity Adjustment

Hi-Level Inputs

Connecting speaker level signals directly to the amplifier's Hi-Level Inputs connector.

Low-Pass Filter Control

Preouts

Bass Boost Control

Remote Level Control

Speaker Output

Status Indicator Lights and Protection

Servicing Your Amplifier

Appendix A: Input Sensitivity Level Setting

Appendix B: Specifications

Appendix C: Troubleshooting

My amplifier doesnt turn on

Checks for fuse, connections, and +12V at the remote terminal to diagnose power issues.

My amplifiers output fluctuates

Troubleshooting tips for intermittent output issues related to connections and contact points.

No Output When Amplifier Turns On

Steps to check input signal voltage and amplifier output voltage using an AC voltmeter.

Limited Warranty (USA)