JL Audio M6-10IB - Enclosure Specifications; Recommended Sealed Design; Recommended Ported Design

4 JL AUDIO M 6 -10 I B / M 6 -10 W
All specifications are subject to change without notice.
W
H
D
ENCLOSURE SPECIFICATIONS
NOTE: The enclosure recommendations listed are
external dimensions which assume the use of 3/4"
(19mm) thick material. If you are using 5/8" (16mm)
thick material, subtract 1/4" (6.5mm) from each
dimension. Do not use any material with a thickness
of less than 5/8" (16mm) as this may compromise the
rigidity of the enclosure.
NOTE: All enclosure volumes listed are net
internal volumes! Box volume displacement, port
displacement and brace displacement must be
added to obtain the final gross internal volume. All
enclosure dimensions listed have already taken this
into account.
Subwoofer Recommended Ported Design
Volume
(net int.)
External Dimensions
(Width x Height x Depth)
Round Port Specs
(Inner Diameter x Length)
Tune to:
(Hz)
F3
(Hz)
M6-10IB
2.50 ft
70.8 litres
17 in x 17 in x 20.50 in
432 mm x 432 mm x 676 mm
4 in x 12 in
102 mm x 305 mm
30 25.09
M6-10W
1.50 ft
42.5 litres
17 in x 17 in x 13.125 in
432 mm x 432 mm x 333 mm
3 in x 11.125 in
76 mm x 283 mm
31 29.81
Subwoofer Recommended Sealed Design
Volume
(net int.)
External Dimensions
(Width x Height x Depth)
F3
(Hz)
Fc
(Hz)
Qtc
M6-10IB
2.00 ft
56.6 litres
17 in x 17 in x 16.25 in
432 mm x 432 mm x 413 mm
41.54 53.41 1.0253
M6-10W
0.75 ft
21.2 litres
17 in x 17 in x 7.25 in
432 mm x 432 mm x 184 mm
50.08 56.01 0.8035
W
H
D
ID
L
Ported Design:
M6-10IB
H
D
W
Ported Design:
M6-10W
W
H
D
ID
L
Sealed Design:
M6-10IB
Sealed Design:
M6-10W