JLab Audio OMNI User Manual

CHARGING Note: For optimum performance, charge overnight with Micro USB cable prior to using.
Connect the Micro USB cable to the headphone’s left earcup input and connect the USB into a computer
or AC adaptor (not included). Make sure the USB connection has a power output source.
Solid red light indicates Omni is charging.
Solid white light indicates Omni is fully charged.
Full charge is between 1.5-2 hours.
Notes:
• For Bluetooth to work with your device, make sure the AUX switch is on AUX OUT. Omni will search and connect to the last Bluetooth
device it was connected to when turned on.
• Omni can be connected to 2 devices at one time but cannot play simultaneously. To reset the Bluetooth connection with a new device,
follow the Bluetooth pairing steps. To unpair, select forget JLab Omni on your device in your Bluetooth settings.
• If for any reason Bluetooth connection is lost, manually reconnect your Bluetooth device.
OMNI WIRELESS HEADPHONES
We love that you are rocking JLab Audio!
We take pride in our products and fully stand behind them.
S
A
T
I
S
F
A
C
T
I
O
N
G
U
A
R
A
N
T
E
E
30
DAY
C
U
S
T
O
M
E
R
S
U
P
P
O
R
T
U
.
S
.
B
A
S
E
D
YOUR SATISFACTION IS GUARANTEED
You may exchange or return merchandise within 30 days of the purchase date.
Learn more at jlabaudio.com/guarantee
YOUR WARRANTY
You may register your product at jlabaudio.com/register. All warranty claims are subject to JLab Audio
authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.
CONTACT US
Reach out to us at support@jlabaudio.com or visit jlabaudio.com/contact
L
I
M
I
T
E
D
O
N
E
Y
E
A
R
W
A
R
R
A
N
T
Y
FIRST TIME SETUP: BLUETOOTH PAIRING
Select “JLab Omni” in your device settings
to connect.
When the headphones
are paired, voice prompts
“Omni paired to device” and
white light blinks slowly.
Bluetooth
JLab Omni
Settings
3
When the Omni Headphones are
powered off, press and hold the center
button for approximately 10 seconds.
The power will first turn on with a
blinking white light and voice
“JLab Omni on” followed by blue and
white blinking lights and voice
“Waiting for device to connect”.
2
Turn on the Bluetooth
in your device settings.
Bluetooth
Settings
1
ACCESSORIES
TRAVEL
CASE
MICRO USB
CABLE
MICRO USB
INPUT
AUX
CABLE
OR
Charging Fully charged

JLab Audio OMNI Specifications

General

Brand	JLab Audio
Model	OMNI
Category	Headphone
Language	English

Summary

First Time Setup Bluetooth Pairing

Accessories Overview

Charging Your Headphones

Charging Indicators

Solid red light indicates charging; solid white light indicates fully charged.

Button Functions

Power On

Turns headphones on by pressing and holding the center button for 3 seconds.

Power Off

Turns headphones off by pressing and holding the center button for 3 seconds.

Playback and Call Control

Controls music playback and call handling by pressing the center button once.

Siri Activation

Activates Siri on Apple devices by pressing and holding the center button for 2 seconds.

Track Control

Navigates tracks by turning the wheel clockwise for forward and counterclockwise for backward.

Volume Control

Adjusts volume by turning the wheel clockwise for up and counterclockwise for down.

Auxiliary Output Functions

Share Your Music

Connect another headphone to share audio from your Bluetooth device via the Omni AUX port.

Bluetooth Receiver Function

Auxiliary Input Function

Headphone Warm-Up Process

Cautions and Precautions

General Care and Handling

Avoid moisture, extreme temperatures, dropping, crushing, or bending cables.

Sound Quality Maintenance

Clean earcups with a cotton swab to remove wax buildup and improve sound.

Usage Discomfort

Adjust volume or discontinue use if experiencing pain or discomfort.

Product Care Advice

Treat headphones with care, similar to sunglasses, and store them safely.