JLG 2032E2 - User Manual

Operators and Safety Manual
ANSI
Model
1932E2
2032E2
2632E2
2646E2
3246E2
3 120854
June 25, 2004

Summary

Section 1: Safety Precautions

1.1 General Safety

Outlines necessary precautions for proper and safe machine usage and maintenance.

1.2 Pre-Operation Safety

Covers operator training, workplace inspection, and machine inspection before operation.

1.3 Operation Safety

Details safe operating practices, including general, trip/fall, crushing/collision hazards.

Section 2: User Responsibilities, Preparation, and Inspection

2.1 Personnel Training

2.2 Preparation, Inspection, and Maintenance

Details periodic machine inspections and maintenance recommendations for aerial work platforms.

Section 3: User Responsibilities and Machine Control

3.2 Personnel Training

3.3 Operating Characteristics and Limitations

3.4 Controls and Indicators (Non-Proportional)

Describes controls and indicators for non-proportional control systems, including ground and platform stations.

3.5 Controls and Indicators (Proportional)

Details controls and indicators for proportional control systems, including the JLG SMART system.

Section 4: Machine Operation

4.3 Motor Operation

4.4 Raising and Lowering (Lifting)

Details the procedures for safely raising and lowering the platform using controls.

4.7 Traveling (Driving)

Section 5: Emergency Procedures

5.1 General Emergency Information

5.3 Emergency Controls and Locations

Identifies the location and function of emergency controls like E-stop and power selector switches.

5.4 Emergency Operation Procedures

Covers manual descent, ground control operation, and handling platform entanglement or tipping.

JLG 2032E2 Specifications

General

Drive Speed	3.5 mph
Power Source	Electric
Drive Speed - Elevated	0.5 mph
Drive Speed - Lowered	3.5 mph
Gradeability	25%
Platform Capacity	500 lbs
Turning Radius (Inside)	0 in
Wheelbase	6 ft 1 in
Machine Width	32 in / 0.81 m