EasyManua.ls Logo

JLG 30AM User Manual

JLG 30AM
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operation and Safety Manual
ANSI
®
Original Instructions - Keep this manual with the machine at all times.
Model(s)
AM Series
20AM
25AM
30AM
36AM
41AM
P/N - 3121211
November 12, 2014

Table of Contents

Other manuals for JLG 30AM

Question and Answer IconNeed help?

Do you have a question about the JLG 30AM and is the answer not in the manual?

JLG 30AM Specifications

General IconGeneral
Number of Occupants2
Gradeability25 %
Batteries4 x 6 V
Voltage24 V
Power SourceElectric
Ground Clearance4 in
Lift Capacity500 lb
Drive Speed - Platform Elevated0.5 mph
Turning Radius (Inside)0 ft
Capacity500 lb

Summary

Section 1 - Safety Precautions

1.2 Transporting

Safety precautions and guidelines for transporting the machine.

Tipping Hazards

Precautions to prevent machine tipping during movement.

1.3 Pre-Operation

Procedures and checks required before operating the machine.

Electrocution Hazard

Information on electrical hazards and minimum approach distances.

1.4 Operation

Guidelines for safely operating the machine during use.

1.5 Maintenance Safety Precautions

Safety measures and precautions for performing maintenance tasks.

Section 2 - User Responsibilities, Machine Preparation, and Inspection

2.3 Pre-Start Inspection

Detailed steps for pre-start checks before operating the machine.

2.4 Function Check

Procedures for checking all machine systems before operation.

2.5 Daily Walk-Around Inspection

Guidelines for performing daily visual inspections of the machine.

Section 3 - Machine Controls and Indicators

3.2 Controls and Indicators

Details on ground and platform control stations.

Platform Control Station

Description of controls and buttons on the platform control station.

Section 4 - Machine Operation

4.2 Operating Characteristics and Limitations

Details on platform raising conditions and capacities.

4.4 Machine Set-Up and Operation

Steps for setting up and preparing the machine for operation.

Outrigger Installation

Procedures for correctly installing the machine's outriggers.

Platform Loading

Information on maximum platform capacity per model.

Platform Operation

Steps for raising and lowering the platform.

4.6 Machine Shut Down and Park

Procedures for safely shutting down and parking the machine.

4.7 Transport, Lifting and Tie Down

Procedures for transporting, lifting, and securing the machine.

Section 5 - Optional Equipment

Section 6 - Emergency Procedures

6.2 Emergency Operation

Procedures for various emergency scenarios.

Operator Unable to Control Machine

Emergency procedures when the operator cannot control the machine.

Section 7 - General Specifications and Operator Maintenance

Related product manuals