Need help?Do you have a question about the JLG 20AM and is the answer not in the manual?
General| Gradeability | 25% |
|---|---|
| Ground Clearance | 3.5 in |
| Platform Length | 6 ft 4 in |
| Platform Width | 2 ft 6 in |
| Drive Speed - Elevated | 0.5 mph |
| Turning Radius (Inside) | 0 ft |
| Raise Time | 35 sec |
| Lower Time | 25 sec |
| Batteries | 4 x 6V |
| Power Source | Electric |
Explains safety symbols and signal words used in the manual and on the machine.
Outlines necessary precautions for safe machine operation and maintenance.
Provides safety guidelines for moving the machine from one location to another.
Details hazards related to machine tipping and precautions to prevent it.
Instructions for safely tilting the machine for transport (AM36/AM41 only).
Covers essential pre-operation checks and procedures before using the machine.
Details minimum approach distances to avoid electrocution hazards.
Provides guidelines and precautions for operating the machine safely.
Safety precautions to follow when performing maintenance on the machine.
Covers training requirements for operators and supervisors.
Discusses periodic inspections and maintenance recommendations.
Details the specific checks to be performed before starting the machine.
Outlines the procedure for checking machine functions before operation.
Provides guidelines for performing a daily walk-around inspection of the machine.
Details the various controls and indicators on the machine.
Describes the controls and indicators located at the ground control station.
Explains the function and location of the manual descent valve.
Describes the controls and indicators located at the platform control station.
Guides the operator through the process of setting up and preparing the machine for operation.
Provides step-by-step instructions for installing the outriggers.
Covers procedures for transporting, lifting, and securing the machine.
Details procedures for emergency operation scenarios.
Instructions for when the platform operator cannot control the machine.
Procedure for rescuing occupants if the platform is jammed overhead.
Steps for safely righting a tipped machine.
Outlines the procedure for notifying JLG of incidents.
Covers operator-level maintenance tasks and recommendations.
To Next Page
