Need help?Do you have a question about the JLG 330CRT and is the answer not in the manual?
General| Engine Make | Kubota |
|---|---|
| Platform Size | 1.83 m x 0.76 m |
| Drive Speed | 3.2 km/h |
| Turning Radius | 3.05 m |
| Machine Width | 1.52 m |
| Machine Length | 4.42 m |
| Wheelbase | 2.44 m |
| Ground Clearance | 0.20 m |
| Lift Time | 45 sec |
| Lower Time | 35 sec |
| Drive Speed - Platform Lowered | 3.2 km/h |
| Turning Radius - Inside | 1.52 m |
| Turning Radius - Outside | 3.05 m |
| Platform Width | 0.76 m |
| Platform Length | 1.83 m |
| Stowed Length | 4.42 m |
| Stowed Width | 1.52 m |
| Weight | 6, 500 lb |
| Machine Weight | 6, 500 lb |
Lists additional manuals such as Service and Maintenance, and Illustrated Parts Manuals.
Explains the meaning and associated colors of DANGER, WARNING, CAUTION, and IMPORTANT safety signal words.
Outlines necessary precautions for proper and safe machine usage and maintenance.
Details operator training, workplace inspection, and machine inspection requirements before operation.
Covers precautions to avoid hazards in the work area before operating the machine.
Specifies that the machine must not be operated until necessary inspections and functional checks are completed.
Addresses safety measures to prevent falls, including proper platform use and securing lanyards.
Discusses ground conditions, grade, and sideslope considerations to prevent machine tipping.
Provides instructions and precautions for towing, lifting, and hauling the machine safely.
Covers miscellaneous hazards and safety tips like welding precautions and battery handling.
Provides information for personnel responsible for placing the machine in operation readiness.
Details initial inspections and checks required before a new machine is put into operation.
Outlines requirements for periodic safety and maintenance inspections by a JLG Dealer.
Provides standard torque values for bolts, useful for maintenance and inspections.
Instructions for switching between gasoline and LP gas fuel sources on equipped machines.
Emphasizes user responsibility for safe practices in machine application and operation.
Stresses the importance of trained and authorized personnel for operation and maintenance.
Covers essential knowledge of machine capabilities, limitations, and controls for safe operation.
Explains the conditions under which the machine provides stable aerial platform operation.
Identifies and explains the functions of various controls and indicators at the ground control station.
Describes the self-propelled aerial work platform and its intended purpose.
Outlines procedures for starting, stopping, traveling, steering, parking, and loading.
Step-by-step instructions for starting the engine from either ground or platform controls.
Describes how to operate the thumb-operated steer control switch for directional movement.
Covers safe procedures for traveling forward and in reverse, including speed considerations.
Explains maximum platform capacity and criteria for safe loading, including load distribution.
Guidelines for securely tying down the machine for transport.
Recommends against towing except in emergencies and refers to specific procedures.
Provides information on systems and controls for use during an emergency situation.
Steps for moving the machine in case of malfunction or power failure to a maintenance area.
Identifies the location and function of emergency stop buttons and control stations.
Details how to operate the machine from ground controls or in emergency situations.
To Next Page
