EasyManua.ls Logo

JLG 45e User Manual

JLG 45e
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operators and Safety Manual
Model
30e
35e
n35e
40e
n40e
45e
3120742
August 14, 2001
ANSI
Property of American Airlines

Table of Contents

Other manuals for JLG 45e

Question and Answer IconNeed help?

Do you have a question about the JLG 45e and is the answer not in the manual?

JLG 45e Specifications

General IconGeneral
Model45E
Horizontal Reach25 ft
Fuel TypeElectric
Lift Capacity500 lb
Power SourceElectric

Summary

SECTION 1 - SAFETY PRECAUTIONS

1.1 GENERAL SAFETY PRECAUTIONS

Outlines necessary precautions for safe machine usage and maintenance.

1.2 PRE-OPERATION SAFETY CHECKS

Details pre-operation checks, manual reading, and workplace inspection.

1.3 GENERAL OPERATION SAFETY

Covers general operation rules, safety devices, and hydraulic cylinder handling.

TRIP AND FALL HAZARDS

Requirements for fall protection and safe platform entry/exit.

ELECTROCUTION HAZARDS

Information on maintaining safe clearance from electrical lines.

TIPPING HAZARDS AND PREVENTION

Precautions related to ground conditions, slopes, and load limits.

CRUSHING AND COLLISION HAZARDS

Safety measures regarding operator headgear, movement, and proximity to others.

1.4 TOWING, LIFTING, AND HAULING

Procedures for towing, lifting, and hauling the machine safely.

SECTION 2 - PREPARATION AND INSPECTION

2.4 DAILY WALK-AROUND INSPECTION

Operator's responsibility to inspect the machine before each workday.

2.5 DAILY FUNCTIONAL CHECK

Performing a check of all systems after the walk-around inspection.

SECTION 3 - USER RESPONSIBILITIES AND MACHINE CONTROLS

FOOTSWITCH OPERATION AND SAFETY

Explains the footswitch as a safety feature for function activation.

POWER/EMERGENCY STOP SWITCH

Describes the function of the power/emergency stop switch.

SECTION 4 - MACHINE OPERATION

4.4 TRAVELING (DRIVING) PROCEDURES

Procedures and warnings for driving the machine.

SECTION 6 - EMERGENCY PROCEDURES

EMERGENCY STOP SWITCH FUNCTION

Location and function of the emergency stop switch.

6.4 EMERGENCY OPERATION

Using ground controls and actions when operator is unable to control.

SECTION 7 - INSPECTION AND REPAIR LOG

Related product manuals