Need help?Do you have a question about the JLG G10-43A and is the answer not in the manual?
General| Maximum Lift Height | 43 ft |
|---|---|
| Maximum Horizontal Reach | 28 ft |
| Weight | 25, 900 lbs |
| Power Source | Diesel |
| Platform Capacity | 1, 000 lbs |
| Fuel Type | Diesel |
| Operating Height | 43 ft |
| Platform Size | 30 in x 72 in |
Defines the essential qualifications and conditions required for machine operators.
Information regarding the approval process for any machine modifications.
Lists related manuals and documentation for further reference.
Explains the hazard classification system and safety signal words.
Provides essential general safety precautions for machine operation.
Details critical safety measures to be followed during machine operation.
Highlights risks and precautions related to machine tip-over.
Covers safety considerations and risks associated with machine movement.
Addresses safety precautions to prevent loads from falling.
Provides safety guidelines specifically for lifting personnel.
Details safety measures for operating on inclined surfaces.
Warns about hazards associated with moving machine parts.
Covers safety precautions related to mounting and dismounting.
Details safety measures related to chemical exposure and handling.
A comprehensive checklist for inspecting the machine before operation.
Ensures all safety decals are legible and properly placed.
Step-by-step guide for performing a walk-around inspection.
Procedures for warming up and checking machine systems.
Inspection guidelines for the operator cab and its components.
Instructions for maintaining clean and unobstructed windows.
Provides an overview of control functions within the section.
Detailed descriptions of the machine's various controls.
Explains the function of dashboard controls and indicator lights.
Information on the ignition switch and starting procedures.
Details the operation and function of the park brake system.
Explains the operation of the transmission control lever for movement.
Details the operation of the joystick for boom functions.
Operation of the joystick for frame leveling and attachment tilt.
Operation of outrigger controls specific to G10-43A models.
Control for operating hydraulic attachments via joystick.
Describes controls and features located on the right-hand panel.
Instructions for operating cabin climate control systems.
Operation of the lever for turn signals and lights.
Explanation of the different steering modes available.
Details on adjusting the operator seat for comfort and safety.
Instructions on fastening and using the seat belt correctly.
Information on indicators for boom angle and extension.
Covers engine starting, operation, and shutdown procedures.
Guidelines for safely lifting and handling non-suspended loads.
Specific procedures for safely lifting and handling suspended loads.
Procedures for loading and securing the telehandler for transport.
Information on determining attachment compatibility and approval.
Warnings and reasons for not using unapproved attachments.
A list of attachments supplied by JLG for the telehandler.
Information on determining the load capacity with attachments.
Instructions on how to properly read and use load capacity charts.
An example illustrating the use of a load capacity chart.
Step-by-step procedures for installing attachments.
Specifics for operating attachments that use hydraulics.
Procedures for repositioning the machine's forks.
General guidelines for operating various machine attachments.
Operation specifics for the carriage with forks attachment.
Operation specifics for the side tilt carriage attachment.
Operation specifics for the swing carriage attachment.
Operation specifics for the dual fork positioning carriage.
Operation specifics for the mast carriage attachment.
Operation of mast carriage with swing and side shift functions.
Operation of mast carriage with side tilt function.
Operation specifics for the fork mounted hook attachment.
Operation specifics for the truss boom attachment.
Operation specifics for the bucket attachment.
Operation specifics for the grapple bucket attachment.
Operation of the quick switch mounted personnel platform.
Operation of the fork mounted personnel platform.
Operation specifics for the boom head-mounted winch.
Procedures for safely towing a telehandler that cannot move under its own power.
Critical procedure for safely lowering the boom in an emergency.
Instructions for safely exiting the cab in an emergency.
General introduction to the lubrication and maintenance section.
Personal protective equipment and clothing requirements for maintenance.
Essential guidelines and precautions before performing maintenance.
Overview of recommended maintenance intervals and tasks.
Detailed schedules for machine lubrication based on operating hours.
Maintenance tasks that can be performed by the machine operator.
Maintenance and checking procedures for the hydraulic return filter.
Procedures for checking and maintaining the engine cooling system.
Guidelines for checking and maintaining the machine's battery.
Maintenance for the windshield washer fluid level.
Detailed technical specifications for the telehandler model.
To Next Page
