EasyManua.ls Logo

JLG 450AJ II Series User Manual

JLG 450AJ II Series
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operation and Safety Manual
ANSI
®
Original Instructions - Keep this manual with the machine at all times.
Boom Lift Models
450A Series II
450AJ Series II
S/N 0300160835-
S/N E300001114
to Present
3121289
January 5, 2015

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the JLG 450AJ II Series and is the answer not in the manual?

JLG 450AJ II Series Specifications

General IconGeneral
Platform Height45 ft
Platform Capacity500 lb
Platform Capacity - Unrestricted500 lb
Gradeability - 2WD30%
Turning Radius - Outside14 ft 8 in
Ground Clearance1 ft
Horizontal Outreach25 ft
Horizontal Reach25 ft
Swing360 Degrees Continuous
Platform Rotator180°
ControlsProportional
Batteries12 Volts DC
Fuel Tank15 gal

Summary

SECTION 1 - SAFETY PRECAUTIONS

1.2 PRE-OPERATION

Safety requirements and checks before operating the machine.

1.3 OPERATION

Guidelines for safe and correct machine operation.

Electrocution Hazards

Information on avoiding electrical hazards while operating the machine.

Tipping Hazards

Guidelines to prevent machine tipping due to slopes or uneven surfaces.

Crushing and Collision Hazards

Measures to avoid crushing or collision injuries during machine operation.

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION

2.2 PREPARATION, INSPECTION, AND MAINTENANCE

Procedures for preparing, inspecting, and maintaining the machine.

SECTION 3 - MACHINE CONTROLS AND INDICATORS

3.2 CONTROLS AND INDICATORS

Detailed breakdown of all machine controls and indicator functions.

Ground Control Station

Description of controls located at the ground control station.

Platform Control Station

Description of controls located at the platform control station.

SECTION 4 - MACHINE OPERATION

4.2 OPERATING CHARACTERISTICS AND LIMITATIONS

Information on machine capabilities, load limits, and stability.

4.4 TRAVELING (DRIVING)

Instructions and safety precautions for driving the machine.

4.7 BOOM

Operation of the boom functions including swing and lift.

SECTION 5 - EMERGENCY PROCEDURES

5.3 EMERGENCY OPERATION

Steps for operating the machine during emergencies.

SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE

6.2 OPERATING SPECIFICATIONS AND PERFORMANCE DATA

Key operating specifications, capacities, and performance data.

6.3 OPERATOR MAINTENANCE

Routine maintenance tasks to be performed by the operator.

Related product manuals