EasyManua.ls Logo

JNC SSF-300 - FM Tuner Operation

Default Icon
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
7
Operating the FM Tuner Mode
While playing in Music Mode, press MODE button to select FM Tuner Mode
before proceed to the next step.
FM Tuning
u Auto Scanning the whole FM band
= If the PRESET icon is on, then press < button to turn off the PRESET
icon.
= Then press and hold button ;4 to start auto scanning the whole FM
band.
= Each FM station detected will be stored in the 10 preset channel
(previous preset channel will overwrite by new FM station detected)
u Manual Preset FM Band
= If the PRESET icon is on, then press < button to turn off the PRESET
icon.
= Press : to increase FM frequency. The unit will start Auto Scan
function if the : button is pressed and held for a longer time. The
unit will stop when next FM station is detected.
= Press 9 to decrease FM frequency. The unit will start Auto Scan