What to do if my Joape Bob Fan does not turn on?
If your Joape Fan isn't turning on, there are a few things to check: * Ensure the On/Off button is in the ON position. * Verify the fan is properly plugged into a working electrical outlet. * If plugged in, check the outlet and press the reset button on the GFCI plug if available.
Why is my Joape Bob not misting?
If your Joape Fan isn't misting, here's what you can check: 1. Make sure there is water in the water reservoir. 2. Ensure the mist adjustment valve is open. 3. Inspect the water pump for any defects or dirt and clean it if necessary.
What to do if my Joape Bob is dripping?
If your Joape Fan is dripping, it could be due to a couple of reasons. First, try reducing the mist by adjusting the mist valve. Also, dirt in the reservoir may cause dripping, so perform the cleaning procedures.
Procedure to clean the submersible water pump parts using water and neutral liquid soap.
To Next Page
General