Johannus Studio 150 - INSTALLATION; Installation and connection

User Manual Studio 150
5
2 INSTALLATION
2.1 Installation and connection
2.1.1 Installation organ
1. Position the organ on a stable, horizontal surface.
2. Install the music desk (A) on top of the organ, see § 2.1.2.
3. Install the pedal board (D), see § 2.1.3.
4. Place the organ bench (C) over the pedal.
5. Make sure the voltage of the organ matches the voltage of the mains. See
the serial plate (B).
6. Connect the organ to a grounded power socket.
A
B
C
D