EasyManua.ls Logo

john deer LP19478 - Chemical Label and Handling Safety; Read Chemical Container Label; Handle Chemical Products Safely; Towing and Attachment Safety

john deer LP19478
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LP19478 LP19479 (10/5/2018) 5 15 & 25 GALLON TOW BEHIND SPRAYER
Safety
Read Chemical Container Label
Chemicals can be dangerous. Improper selection or
use can injure persons, animals, plants, soils or other
property. Select the right chemical for the job and
handle and apply with care.
Read the instructions, precautions, and warnings on
the container label before opening. Use the product
strictly according to label directions for specic
applications, in the amounts specied, at the times
specied and only when needed.
Keep the container closed tightly except when
preparing the mix.
Do not remove labels from chemical containers. Store
all chemicals in their original containers.
Do not mix chemicals unless stated on the container
label.
Store chemicals when not in use according to the
container label.
Handle Chemical Products Safely
Direct exposure to hazardous chemicals can cause
serious injury. Potentially hazardous chemicals
used with John Deere equipment include pesticides,
herbicides and fungicides.
A Material Safety Data Sheet (MSDS) provides specic
details on chemical products: physical and health
hazards, safety procedures, and emergency response
techniques.
The MSDS should be obtained from the chemical
dealer at the time of the chemical purchase.
Check the MSDS before beginning any job using a
hazardous chemical. Know exactly what the risks
are and how to do the job safely. Always wear
recommended personal protection equipment.
Towing Loads Safely
Stopping distance increases with speed and weight
of towed load. Travel slowly and allow extra time and
distance to stop.
Total towed weight must not exceed limits specied in
towing vehicle operators manual.
Excessive towed load can cause loss of traction and
loss of control on slopes. Reduce towed weight when
operating on slopes.
Never allow children or others in or on towed
equipment.
Use only approved hitches. Tow only with a machine
that has a hitch designed for towing. Do not attach
towed equipment except at the approved hitch point.
Follow the manufacturers recommendations for weight
limits for towed equipment and towing on slopes. Use
counterweights or wheel weights as described in the
machine operator’s manual.
Do not turn sharply. Use additional caution when
turning or operating under adverse surface conditions.
Use care when reversing.
Do not shift to neutral and coast downhill.
Keep Riders O󰀨 Towed Attachment
Keep riders o󰀨 of a towed attachment.
Riders on a towed attachment are subject to injury,
such as being struck by objects and being thrown o󰀨
the attachment during sudden starts, stops and turns.
Riders obstruct the operators view, resulting in the
attachment being used in an unsafe manner.
Keep riders o󰀨 of hitch bracket.
Avoid Injury From Drawbar
Before you disconnect an attachment from machine hitch
plate:
Unload attachment.
Stop attachment on level ground.
Stop machine engine.
Lock machine park brake.
Block attachment wheels.
Make sure hands, feet or other body parts are not
under drawbar.
Practice Safe Maintenance
Only qualied, trained adults should service this
machine.
Understand service procedure before doing work.
Keep area clean and dry.
Do not operate the engine in a conned space where
dangerous carbon monoxide fumes can collect.
Never lubricate, service or adjust the machine or
attachment while it is moving. Keep safety devices in
place and in working condition. Keep hardware tight.
Keep hands, feet, clothing, jewelry, and long hair away
from any moving parts, to prevent them from
getting caught.
Lower any attachment completely to the ground or
to an existing attachment mechanical stop before
servicing the attachment. Disengage all power and
stop the engine. Lock park brake and remove the key.
Let machine cool.

Related product manuals