John Lewis Charlotte Bed 80371707 User Manual

1/6
Charlotte Bed
PRE-ASSEMBLY PREPARATION
Please check the pack contents before attempting to assemble this product. A full checklist of components is
given in this leaflet. If any components are missing, please contact the John Lewis Helpline.
This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE WHEN
LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 40 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
Read this leaflet in full before commencing assembly.
If you require any additional information or have any issues with this product please call the
John Lewis Helpline on 01244 689949 or email mail@fwgroup-uk.com
Double
John Lewis
For product support or spare parts please call
the John Lewis Helpline;
T: 01244 689949
E: mail@fwgroup-uk.com
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools
Thank you for purchasing this Charlotte Bed. Please read the instructions carefully before use to ensure
safe and satisfactory operation of this product.
Not included in hardware list

John Lewis Charlotte Bed 80371707 Specifications

General

Brand	John Lewis
Model	Charlotte Bed 80371707
Category	Indoor Furnishing
Language	English

Summary

PRE-ASSEMBLY PREPARATION

Necessary Tools

Lists required tools for assembly.

Lifting and Handling Safety

Important safety advice regarding the weight, lifting, and small parts of the product.

Fittings and Parts Checklist

Step-by-Step Assembly Instructions

Step One

Hook side rails to headboard and footboard loosely.

Step Two

Insert and secure the centre rail, then tighten all previous fixings.

Assembly Steps Continued

Step Three

Attach legs to metal plates using washers and nuts.

Step Four

Attach legs to headboard and footboard using bolts and screws.

Final Assembly Steps

Step Five

Insert slats with appropriate centre and side caps.

Step Six

The bed is now ready for use.

Care and Maintenance

Cleaning Instructions

Clean with a soft damp cloth and dry immediately. Avoid excessive moisture and detergents.

Safety Instructions

Guidelines for safe handling, assembly, and general product usage.