3
FOR SERVICE ASSISTANCE, CALL 800-433-0708 OR VISIT JOHNDOW.COM
REGULATIONS FOR USE
GETTING STARTED
The persons or functions using this product may be subject to additional regulations including
PHMSA, DOT 49 CFR Subchapter C – Hazardous Materials Regulations (HMR) as well as
requirements of other federal agencies, and requirements of state and local government agencies.
It is the persons responsibility to determine the applicability of these regulations and for compliance
to these regulations.
Resources for additional information:
https://www.phmsa.dot.gov/regulations-and-compliance
https://www.phmsa.dot.gov/about-phmsa/phmsa-faqs
Before assembly, ensure you have all parts according to the contents list below. If any parts are
missing or damaged, contact JohnDow Industries for replacement.
CONTENTS
Item No. Description Qty.
1 Tank 1
2 1/2” x 10' Hose w/1/2” NPT & 3/4” NPT Fittings 1
3 Dispensing Nozzle 1
4 Ground Wire 1
5 10-32 x 3/8” Self-Tapping Ground Screw (assembled onto tank) 1
6 2-1/4” Fill Cap w/Rubber Gasket 1
7 5/16” x 1-1/2” Hex Head Cap Screw, Grade 8.8 4
8 5/16” Flat Washer 8
9 5/16” Hex Nut 4
10 UN1203 Gasoline Label (not pictured) 1
1
5
4
2
3
6
79
8
TOOLS REQUIRED
Flat Head Screwdriver or 5/16” (or 8mm) Nut Driver Adjustable Wrench
7/8” and 1-1/16” Wrench PTFE Tape (included)
To Next Page
Loading...
Need help?
General
