XM Wheeled Dry Chemical Fire Extinguisher
Operation and Maintenance Manual
(Part No. S-50651)
2023-AUG-30 REV. 02
FOREWORD
This manual is intended for use with ANSUL® XM Wheeled
Fire Extinguishers. Use this guide if you operate, recharge,
inspect, or maintain these fire extinguishers.
Fire extinguishers are mechanical devices. They need periodic
inspection and maintenance to check that the fire suppression
system is fully charged and operable and that the fire extin-
guishers are working safely and effectively.
Inspect fire extinguishers at regular intervals. Inspection
intervals can be hourly to monthly, depending on the
circumstances.
Maintain fire extinguishers annually or whenever an inspection
indicates maintenance.These fire extinguishers are pressure
vessels and must be handled carefully.
Only use genuine ANSUL® replacement components with
ANSUL® products. ANSUL® products must be serviced and
maintained by Authorized ANSUL® Distributors.
This guide is limited to the uses it describes. For other appli-
cations, contact your local Authorized ANSUL® Distributor or
Johnson Controls Technical Services Department, Marinette,
Wisconsin 54143-2542, USA.
Note: The converted metric values in this manual are provided
for dimensional reference only and do not reflect an actual
measurement.
DISCLAIMER:
Johnson Controls does not make any representations,
warranties or guarantees, expressed or implied, as to the
accuracy or completeness of the manual. Users must be aware
that updates and amendments will be made from time to time to
the manual. It is the user’s responsibility to determine whether
there have been any such updates or amendments. Neither
Johnson Controls nor any of its directors, officers, employees,
or agents shall be liable in contract, tort, or in any other manner
to any person for any loss, damage, injury, liability, cost, or
expense of any nature, including without limitation incidental,
special, direct, or consequential damages arising out of or in
connection with the use of the manual.
All instructions contained herein relate to a typical installation.
Part Number: S-50651-02
Date: 2023-AUG-30
ANSUL® and the product names listed in this material are marks and/or
registered marks. Unauthorized use is strictly prohibited.
To Next Page
Loading...