Table 11: XPM Controller accessories (order separately)
Product Code Number Description
ACC-TBKINOUT-0
Input and Output terminal block replacement kit for SNC, CGM, CVM and XPM
products. Kit includes 5 of each 2, 3, and 4 position Input and Output terminal
blocks. 30 terminal blocks in total.
ACC-TBKPWFCSA-0
Power, FC Bus, and SA Bus terminal block replacement kit for SNC, CGM, CVM, and
XPM products. Kit includes 5 of each terminal block type. 15 terminal blocks in
total.
MS-FIT100-0
The Field Inspection Tool or (FIT) is a portable handheld device with a user
interface that is used to test and troubleshoot the BACnet protocol MS/TP RS-485
communications bus that connects supervisory controllers and equipment
controllers to field point interfaces.
The FIT can be used to check out the wiring of the MS/TP RS-485 bus as well
as verify proper communications of supervisory controllers and equipment
controllers connected to the bus. The FIT can be used on both the FC Bus and SA
Bus.
F4-XPM Expansion Modules Installation Guide 19
To Next Page
Loading...
Need help?
General
