QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 13 27
DISARMING KEYS:
Disarming from the IQ Keypad is easy. Simply enter a valid 4 - 6 digit code into the keypad and the system will disarm.
NOTE: If successful, the Armed Status LED will flash twice. If
communication is not successful, the keypad flashes all keypad
number LED’s (backlight) 0.5 seconds ON/OFF twice.
PROX TAG SUPPORT:
For “IQ Keypad Prox-PG” models that support Prox Tags,
simply present your tag in front of the bullseye icon on the
lower right hand side of the keypad and it will light up
indicating the the tag has been read successfully. If the
system is armed, presenting a valid Prox Tag will disarm it.
To Next Page
Loading...
Need help?
General
