Accessories ordering information
Table 9: Accessories Ordering Information
Product Code Number Description
IOM Series Controllers
Refer to the Metasys
®
System Field Equipment Controllers and Related Products Product Bulletin (LIT-12011042)
for a complete list of available IOM Series Controllers.
Mobile Access Portal
(MAP) Gateway
Refer to the Mobile Access Portal Gateway Catalog Page (LIT-1900869) to identify the appropriate product for
your region.
Note: The MAP Gateway serves as a replacement for the BTCVT, which is no longer available for
purchase, but continues to be supported.
TL-CCT-0 Metasys Controller Configuration Tool (CCT) Software
MS-FCP-0 Metasys Equipment Controller Firmware Package Files for CCT
MS-DIS1710-0 Local Controller Display
NS Series Network
Sensors
Refer to the NS Series Network Sensors Product Bulletin (LIT-12011574) for specific sensor model descriptions.
TP-2420 Transformer, 120 VAC Primary to 24 VAC secondary, 20 VA, Wall Plug
Y65T31-0
Transformer, 120/208/240 VAC Primary to 24 VAC Secondary, 40 VA, Foot Mount, 8 in. Primary Leads and
Secondary Screw Terminals, Class 2
Note: Additional Y6x-x Series transformers are also available. Refer to the Series Y63, Y64, Y65, Y66, and
Y69 Transformers Product Bulletin (LIT-125755)
AS-XFR050-0
for more information.Power transformer (Class 2, 24 VAC, 50 VA maximum output), no enclosure for more
information.
AS-CBLTSTAT-0 Cable adapter for connecting to 8-pin TE-6700 Series sensors
AP-TBK4SA-0 Replacement SA Bus Terminal Blocks, 4-Position, Brown, Bulk Pack of 10
AP-TBK4FC-0 Replacement FC Bus Terminal Blocks, 4-Position, Blue, Bulk Pack of 10
AP-TBK3PW-0 Replacement Power Terminal Blocks, 3-Position, Gray, Bulk Pack of 10
FAC4911 Advanced Application Field Equipment Controller Installation Guide 21
To Next Page
Loading...
Need help?
General
