Technical Bulletin—TC-9102 31
Table 6: Room Command Module Ordering Codes
Ordering Code Description
TM-9150-0000 Occupancy Button NTC Sensor w/o S.P. dial
TM-9160-0000 Occupancy Button NTC Sensor 12-28°C
TM-9160-0005 Occupancy Button NTC Sensor +/- 3 K
TM-9160-0002 Occupancy Button NTC Sensor 12-28°C 3-Speed Fan Override
TM-9160-0007 Occupancy Button NTC Sensor +/- 3 K 3-Speed Fan Override
TM-9170-0000 Occupancy Button w/o Sensor 12-28°C
TM-9170-0005 Occupancy Button w/o Sensor +/- 3 K
TM-9170-0002 Occupancy Button w/o Sensor 12-28°C 3-Speed Fan Override
TM-9170-0007 Occupancy Button w/o Sensor +/- 3 K 3-Speed Fan Override
TM-9180-0100 LCD Display with View Mode and Clock Setting only
TM-9180-0200 LCD Display with View Mode and Programming Mode
Note:All models above with off-white cover and grey base.
Add “-W” to code for white cover and white base, e.g., TM-9150-0000-W.
Add “-K” to code for set point dial with serrated edge (not for TM-9150 or TM-9180),
e.g. TM-9160-0005-K, TM-9160-0005-WK.
Table 7: Software and Accessories Ordering Codes
Ordering Code Description
TE-9100-8501 Unit Mount NTC Temperature Sensor (1.5-m cable)
TC-9100-TOOL Commissioning Software for DOS (3.5" diskette)
WS-EURPRO-0 Configuration Tools Software for Windows®, New (3.5" diskettes)
WS-EURPRO-6 Configuration Tools Software for Windows®, Upgrade (3.5" diskettes)
To Next Page
Loading...
