Johnson Controls METASYS VAV110 - Page 65

VAV Controller—Variable Air Volume (VAV) Controller 65
charta
Define Remote AI Points
1. None
2. Cooling/Heating Setpoints
3. Warmer/ Cooler Adjust
Define "Occupied" Mode
1. Software (N2) Command
2. Hardware BI point
3. Both with BI Backup
4. Both can Activate
Define "Standby" Mode
1. Software (N2) Command
2. Hardware BI point
3. Both with BI Backup
4. Both can Activate
Define "Shutdown" Mode
1. Software (N2) Command
2. Hardware BI point
3. Both with BI Backup
4. Both can Activate
Do You Want the Temporary Occupied Feature
1. No
2. Yes
Do You Want Boost Mode
1. No
2. Yes
Go Check Parameters and IO Points
Then Save the Configuration File
Figure 32: HVAC PRO for Windows Dual Duct
Configuration Flowchart (Part Two of Two)