Vertical Wallbox-Mounted or Surface-Mounted NS Series Network Sensors
PIR occupancy sensor motion detection Minimum 94 angular degrees up to a distance of 26 ft
(8m); Based on clear line of sight
UL Listed, File E107041, CCN PAZX, Under UL 60730-1,
Energy Management Equipment
Compliance United States
FCC Compliant to CFR 47, Part 15, Subpart B, Class B
Canada cUL Listed, File E107041, CCN PAZX7, Under CAN/CSA
E60730-1, Signal Equipment
Europe CE Mark – Johnson Controls declares that this product
is in compliance with the essential requirements and
other relevant provisions of the EMC Directive and RoHS
Directive.
Australia and New Zealand RCM Mark, Australia/NZ Emissions Compliant
China RoHS2
Dimensions (height x width x depth) 3.4 in. x 5 in. x 1.1 in. (85.3 mm x 127.55 mm x 26.8 mm)
Shipping weight 0.4 lb/0.18 kg
The performance specifications are nominal and conform to acceptable industry standard. For application at conditions
beyond these specifications, consult the local Johnson Controls office. Johnson Controls shall not be liable for damages
resulting from misapplication or misuse of its products.
UL conformity declaration information
Information Description
Purpose of control Operating control
Construction of control Independently mounted
Type 1 or Type 2 Action Type 1
External pollution situation Pollution degree 2
Rated impulse voltage 330 V
External power supply Intended for connection to Johnson Controls field controllers supporting the standard JCI
SA Bus implementation.
CO
2
sensor information The Model NSx8 Series Wall Mount sensors, sense, in part CO
2
. This functionality is
intended to provide an input to equipment under normal operating conditions. Where
failure or malfunction of the transmitter could lead to personal injury or property damage
to the controlled equipment or other property, additional precautions must be designed
into the control system. Incorporate and maintain other devices, such as supervisory or
alarm systems or safety or limit controls, intended to warn of or protect against failure or
malfunction of the sensor.
Product warranty
This product is covered by a limited warranty, details of which can be found at www.johnsoncontrols.com/
buildingswarranty.
Software terms
Use of the software that is in (or constitutes) this product, or access to the cloud, or hosted services applicable to
this product, if any, is subject to applicable end-user license, open-source software information, and other terms
set forth at www.johnsoncontrols.com/techterms. Your use of this product constitutes an agreement to such terms.
Patents
Patents: https://jcipat.com
Vertical Wallbox-Mounted or Surface-Mounted NS8000 Series Network Sensors Installation Guide 11
To Next Page
Loading...
Need help?
General
