Johnson Controls NS8000 Series User Manual

Location considerations
Note:
• Locate the network sensor away from steam or
water pipes, warm air stacks, unconditioned areas
(not heated or cooled), or sources of electrical
interference.
• Height requirements may vary depending on the
site.
•
Network sensors without CO
2
sensing are
shock and vibration resistant, but not shock
and vibration proof. Be careful not to drop the
unit or mount it where it could be exposed to
excessive vibration. Dropping a CO
2
network
sensor may result in readings outside of the
specified accuracy tolerance.
Special tools (only one type needed)
Figure 1: Johnson Controls T-4000-119 Allen-head
adjustment tool
Figure 2: JC 5309 Allen-head flexible tool
Figure 3: 1/16 in (1.5 mm) Allen wrench
Vertical Wallbox-Mounted or Surface-Mounted NS8000 Series Network Sensors Installation Guide2

Johnson Controls NS8000 Series Specifications

General

Brand	Johnson Controls
Model	NS8000 Series
Category	Accessories
Language	English