TEC3000 Series Networked and Wireless Proportional Fan Coil and Individual Zone Thermostat Controllers with
Dehumidification Capability Installation Guide
16
Humidity
On
Standby
Indicates the humidity reading.
Degree
On
Standby
Indicates that the unit is set to degrees.
Network Communication
(for Networked Models)
No Signal
Indicates that the thermostat controller detected a supervisory controller and both
are online.
Indicates that the thermostat controller did not detect a supervisory controller.
Radio Signal (for
Wireless Models)
No Signal
Low Signal
Medium Signal
High Signal
Indicates the strength of the radio signal.
Arrow Up
Arrow Down
Increases or decreases the cooling value on the home screen.
Arrow Up
Arrow Down
Increases or decreases the heating value on the home screen.
Cooling Hold
Indicates that cooling hold mode is enabled. Hold mode is disabled by pressing
the button.
Heating Hold
Indicates that heating hold mode is enabled. Hold mode is disabled by pressing
the button.
Table 5: Touchscreen icons (Part 2 of 5)
Icon Icon name Description
To Next Page
Loading...
