Need help?Do you have a question about the Johnson Controls Tyco Kantech KT-400 and is the answer not in the manual?
General| Brand | Johnson Controls |
|---|---|
| Model | Tyco Kantech KT-400 |
| Category | Controller |
| Language | English |
A checklist to ensure all installation steps are completed.
Technical support contact details for US and Canada.
Technical support contact details for Latin America and Caribbean.
Technical support contact details for EMEA region.
Technical support contact details for Asia Pacific region.
EntraPass compatibility based on OS.
Configuring KT-400 with EntraPass, Web configuration, and KT-Finder.
Details on the four on-board doors supported by the controller.
Available communication ports for connectivity.
Using KT-400 with EntraPass via LAN/WAN.
Information on the 16 onboard inputs and expansion capabilities.
Details on the 4 onboard lock outputs.
Details on the 4 onboard relay outputs and expansion.
Information on the 4 onboard reader interfaces.
Support for elevator interfacing with expansion modules.
Support for alarm panel interfacing.
How the controller detects communication speed and ports.
Calculating current draw for SPI expansion modules.
Guidelines for adding expansion modules to the SPI chain.
Ways to set up KT-400 with EntraPass Special/Corporate.
Ways to set up KT-400 with EntraPass Global Edition.
Ways to set up KT-400 with EntraPass Global Edition and KT-NCC.
Setting up KT-400 using RS-232.
Understanding controller status via heartbeat LED patterns.
Electrical parameters and current ratings.
List of KT-400 models and expansion modules.
Details on different KT-400 model configurations.
Items required before starting the installation.
Guidelines for mounting the controller cabinet.
Proper grounding procedures for the controller.
Connecting door lock devices to the controller.
How to connect devices to the controller's inputs.
Connecting ioSmart, ABA, and OSDP readers.
Using auxiliary outputs for visual/audible feedback.
Linking controllers via RS-485.
Connecting to a PC using RS-232.
Connecting via Ethernet to a corporate network.
How to perform a soft reset using jumpers and buttons.
How to perform a hard reset to default values.
Resetting to a static IP address.
Resetting to factory default DHCP mode.
Steps for initial configuration if no communication.
Detailed steps to reset the controller to factory defaults.
Guide to activating standalone mode.
Alternative methods for standalone activation.
Steps to configure the controller for EntraPass mode.
Accessing and configuring the KT-400 via its web interface.
Using KT-Finder application for configuration.
Requirements for UL listings and certifications.
UL 294 compliance requirements and performance levels.
UL 1076 compliance for proprietary control units.
Regulatory compliance for FCC and ICC.
Compliance with EU directives for CE and UKCA.
EN50133 functional requirements and parameters.
Guidelines for securing deployment, managing users, and protecting networks.
Procedures for updating firmware and configuring via browser or KT-Finder.
Steps for resetting the controller and deployment guidelines.
To Next Page