Johnson Controls VA-7010 Series - User Manual

FANs 977, 1628.3
Product/Technical Bulletin VA-7010
Issue Date 0199
© 1999 Johnson Controls, Inc.
1
Part No. 34-636-763, Rev. B www.johnsoncontrols.com
Code No. LIT-977360
VA-7010 Series Electric On/Off Actuator
The VA-7010 Series Electric On/Off Actuators provide
two-position (open/closed) control and can easily be
field mounted with a threaded coupling onto VG5000
Series Forged Brass Valves. Refer to the
VG5000
Series Forged Brass Valves 1/2 Through 1 in.,
Two-Way Normally Closed and Three-Way
Product/Technical Bulletin
(LIT-977135
) for specific
information.
A lever at the side of the actuator housing can be used
to open the mounted valve manually for servicing.
Figure 1: VA-7010 Actuator with VG5000 Valve
Features and Benefits
❑
Low or Line Voltage Model
Available
Provides application flexibility
❑
AC Stall Type Motor Ensures quiet operation
❑
Manual Lever Allows manual position mode for servicing
❑
Flat Profile Design with
Small Side Clearance
Provides mounting close to flat surfaces;
saves space
❑
Actuator can be Mounted
after Valve Body is
Installed
Simplifies installation in confined spaces;
allows application flexibility
❑
Actuator can be Rotated
after Mounting
Provides easier wiring by locating the wiring
conduit entry in any direction

Summary

VA-7010 Series Electric On;Off Actuator

Features and Benefits

Highlights key advantages and operational features of the VA-7010 actuator.

Operation

Mounting

Mounting the Actuator on a VG5000 Valve

Step-by-step instructions for attaching the VA-7010 actuator to a VG5000 valve.

Manual Override

Wiring

VA-7010 Wiring Diagram

Illustrates the wire connections for different voltage models of the VA-7010 actuator.

Ordering Information

Actuator Combinations

Details on combining the VA-7010 actuators with VG5000 valve series.

Specifications

Johnson Controls VA-7010 Series Specifications