Johnson Controls VAV1717 - Termination Details

Termination details
Johnson Controls uses a set of termination diagrams to describe the details for wiring inputs and outputs to controllers.
See the following table for the termination diagrams that apply to this controller.
Table 9: Termination diagrams
Type of field
device
Type of input
or output
Termination diagrams
Voltage Input -
External Source
UI
Voltage Input -
Internal Source
UI
Voltage Input
(Self-Powered)
UI
Temperature
Sensor
UI
Dry Contact UI
0–10 VDC Output
to Actuator
(Internal Source)
CO
Note: Add the jumper from 24VAC Com to only one AO Com per transformer.
VAV1717 and VAV1732 VAV Controllers Installation Guide12