How to change fan speed in dry mode on Johnson Controls Air Conditioner?
In DRY mode on your Johnson Controls Air Conditioner, the fan speed cannot be manually changed. When the room temperature drops below the set temperature plus 2 degrees Celsius, the unit will run intermittently at LOW speed, regardless of the fan setting.
Why is my Johnson Controls York YH9FZH12BAH-AFX not cooling properly?
If your Johnson Controls Air Conditioner isn't cooling well, several factors could be the cause. First, check if the air filter is dirty and clean it; it should be cleaned every 15 days. Ensure there are no obstructions blocking the air inlet or outlet. Verify that the temperature is set correctly. Also, make sure all doors and windows are closed and that direct sunlight is minimized with curtains. Finally, consider whether there are too many heat sources or people in the room.
Why is my Johnson Controls Air Conditioner making noise?
During operation, a swishing or gurgling noise from your Johnson Controls Air Conditioner is normal due to refrigerant flowing in the system; this is more noticeable in the first few minutes after starting. A cracking noise can occur as the casing expands or shrinks with temperature changes. However, if there's a significant noise from airflow, the air filter may be too dirty.
Why does my Johnson Controls York YH9FZH12BAH-AFX Air Conditioner not restart immediately?
If your Johnson Controls Air Conditioner doesn't restart immediately after being stopped, it's because there's a 3-minute delay to protect the system. This protection circuit also activates if the unit is unplugged and plugged back in.
Why does my Johnson Controls Air Conditioner smell?
If your Johnson Controls Air Conditioner is generating smells, it's likely circulating odors from the room, such as those from furniture, paint, or cigarettes.
General| Category | Air Conditioner |
|---|---|
| Phase | 1 |
| Refrigerant | R-410A |
| Brand | Johnson Controls |
| Model | YH9FZH12BAH-AFX |
| HSPF Rating | 10 |
| Voltage | 230V |
| Cooling Capacity | 12000 BTU/h |
| Heating Capacity | 12000 BTU/h |
Identifies and describes components of the indoor unit.
Lists and explains the buttons and displays on the remote.
Identifies and describes components of the outdoor unit.
Provides instructions on setting the clock on the unit.
Step-by-step guide for installing batteries in the remote.
Covers basic unit start, mode selection, temperature, and fan speed settings.
Instructions for operating the unit when the remote is lost or for testing.
Explains how to adjust the vertical and horizontal airflow direction.
Details how the sleep mode adjusts temperature for comfortable sleeping.
Explains POWER for rapid temp change and SOFT for quiet operation.
Describes settings for directing airflow for improved comfort and health.
Instructions for setting timed ON, OFF, or ON-OFF operations.
Tips for efficient use, including temperature, airflow, and closing windows.
Step-by-step guide for cleaning the air filter.
Instructions for replacing the optional air purifying filter.
Critical safety warnings regarding installation and operation.
Lists actions that are strictly forbidden to ensure safety.
Advisories on proper usage and handling to prevent issues.
Checks for common issues like delayed restart or noises.
Guides on checking filters, obstacles, settings, and room conditions.
Details the machine's adaptive ambient temperature ranges.
Safety guidelines for power supply, fuses, wiring, and disposal.
To Next Page