Need help?Do you have a question about the Johnson Controls YORK YV2VYH010KAR-D-X and is the answer not in the manual?
Details the permissible operating conditions for cooling and heating modes.
Covers general safety guidelines, warning types, and manual handling.
Details safety measures for installation, foundation, wiring, and refrigerant handling.
Highlights cautionary advice and lists specific tools required for R-410A systems.
Provides a guide to the installation and startup procedures for the system.
Details suitable and unsuitable locations for installing the outdoor unit, considering safety and performance.
Provides instructions on how to safely transport the unit to its installation location.
Provides detailed physical dimensions and mounting hole specifications for the YV2VYH010KAR-D-X model.
Details physical dimensions for YV2VYH015/018KAR-D-X and YV2VYH015/018KAS-D-X outdoor units.
Illustrates required clearances around the outdoor unit for single and multiple unit installations.
Explains how to connect refrigerant pipes, including methods, cautions, and material selection.
Highlights critical safety and technical precautions during refrigerant piping installation.
Details pipe diameter, thickness, and material requirements for refrigerant lines.
Specifies the maximum permissible pipe lengths and height differences for different unit types.
Details pipe diameters, connection methods, and torque specifications for outdoor and indoor units.
Guides the selection and installation of manifold pipes, with notes on pipe connection and welding.
Covers pipe connection, expansion, and brazing techniques, emphasizing impurity prevention.
Details the process of charging nitrogen and performing pressure tests to detect refrigerant leaks.
Explains the procedure for evacuating the system to remove moisture and non-condensable gases.
Specifies the correct torque values for tightening check valves on gas and liquid pipes.
Details how to calculate and charge additional refrigerant based on pipe length and diameter.
Outlines the importance and method of heat insulating gas and liquid refrigerant pipes.
Explains communication wiring configurations, including 1-to-multi, 1-to-1, and 2-to-1 setups.
Details power wiring diagrams and specifications for power cables and circuit breakers.
Specifies requirements for pulse ammeters and their recommended ranges for different system capacities.
Details indoor power/communication wiring, wire specifications, and control type switchover settings.
Explains the function of SW01 and SW02 switches on the outdoor unit control PCB for monitoring.
Details dipswitch settings for different outdoor unit PCB versions (0151800123 and 0151800123A).
Describes the function of outdoor unit LEDs and provides bridge instructions for PCB testing.
Lists failure codes displayed on the outdoor unit and their corresponding malfunction descriptions.
Details failure codes for indoor units, including indications on master units and wired controllers.
Explains operational features like delay function, cooling/heating modes, and defrosting.
Covers operating conditions, humidity limits, and protection devices like high-pressure switches.
Discusses unit behavior during power failures and factors affecting heating capacity.
Details system marking conventions and essential pre-trial operation checks.
General| Brand | Johnson Controls |
|---|---|
| Model | YORK YV2VYH010KAR-D-X |
| Category | Air Conditioner |
| Language | English |
To Next Page