To Next PageTo Next Page
Need help?Do you have a question about the Johnson Outdoors Utility 9.4 and is the answer not in the manual?
General| Brand | Johnson Outdoors |
|---|---|
| Model | Utility 9.4 |
| Category | Boat |
| Language | English |
Custom designed boat covers made from vinyl.
Trailers for JOW-Sport & Leisure fishing boats.
Accessories for rowing, like oar locks and oars.
Applying registration decals to the boat.
Information on the durability and care of laminated boats.
Instructions for cleaning the boat with mild detergent and a soft brush.
Care for boats used in salt or brackish water to prevent marine growth.
Maintenance for the aerator pump on specific models (10.2 & 10.6).
How to securely transport the boat in a pickup truck.
Proper procedures and support for trailering the boat.
Specific precautions for towing the Watertender 9.4 behind a yacht or larger boat.
How to achieve planing for the 10.6 model by adjusting trim and weight.
Information on hull flexing during operation and its benefits.
Planing guidance for models other than the 10.6.
Advice on proper mooring and docking procedures to avoid hull damage.
Instructions for operating the livewell, including filling and aeration.
Guidance on using navigation lights in poor lighting conditions.
Step-by-step guide for launching the boat safely.
Importance of checking weather conditions before operating the boat.
Safety requirement for wearing proper Personal Flotation Devices (PFDs).
Details on the boat's hull and deck materials and construction.
Information on boat capacity limits and flotation provided by foam blocks.
Overview of boat parts and initial setup procedures.
Instructions for installing boat seats and mounting bases.
Procedure for installing drain plugs in the boat.
Connecting a 12V marine battery for boat power.
Steps for installing optional oar lock kits.
Ensure all drain plugs are installed correctly before launching.
How to manage and drain water accumulation from the hull.
Verify weight load and motor limits against the capacity plate.
Distribute weight evenly when loading the boat.
Detailed instructions for connecting trolling motor power wires.
How navigation lights are controlled and operated on the boat.
Control and fuse information for the livewell aerator pump.
Details on the separate accessory circuit for extra power.
Recommended locations for mounting fish finders or other accessories.
Methods for mounting fish finder transducers on the boat.
Connecting power for fish finders or other accessories.
Specific mounting location for accessories at the bow.
Mounting accessories near the boat's control panel.
Connecting power for accessories on the Basstender 11.3 model.
Mounting the main unit of accessories for the 11.3 model.
Transducer mounting for all boat models.
Connecting power for accessories on 9.4 & 10.2 models.
Placing the main unit of accessories for 9.4 & 10.2 models.
Mounting transducers for 9.4 & 10.2 models.
