©2013 Johnson Level & Tool - Rev. 1 9
2. Place the laser on a platform or tripod, connect to the tripod using
the 5/8" thread at the bottom of laser.
Note: If the laser is inclined beyond its self-leveling range, with
transportation locking knob in the on position, the laser will deliver
an audible alarm. Re-position the laser until level.
3. Rotate transportation locking knob counter-clockwise to “ON”,
then turn power on. Press the keys on control panel or remote
control to adjust to your desired working status.
4. After finishing operation or before moving the laser, turn power off
and return locking knob to the “OFF” position.
Note: If transportation locking knob is not turned to the lock position
it will deliver an audible alarm when the unit is returned to its case.
It is important that the locking knob is turned to the locked
position prior to returning the unit to its case.
Note: Remote control operating panel is similiar to laser operating panel.
Power Key
(turns laser power
off
only)
Rotation
speed and
scan keys
Scan Key
High Rotation
Speed Key
7365H-All_Manuals 10/14/13 2:53 PM Page 9
To Next Page
Loading...
Need help?
General
